Back in April, I saw some great chairs at the
Channahon Quilt Show (bottom 10 pictures on the post). I figured that I could recover a couple chairs myself. I'd just recovered a
sewing machine chair a few weeks before. This summer, I bought 4 folding chairs just for this project. I've recovered 2 of these chairs. The other 2 chairs will just have to wait their turn to get recovered. I've written a tutorial on how to recover these chairs.
First, you need to get chairs that the chair pads screw onto the chairs.
 |
| 4 screws hold the top chair pad to the frame |
 |
| 4 screws hold the bottom chair pad to the frame |
I got these chairs at the local Meijer grocery store when they were on sale. They were about $15 per chair.
The fabric is all from my stash. I have a nice stash of 'sewing themed' fabrics that I'm finally starting to use. I used fusible fleece as my backing for these. I didn't want to add a 3rd layer, since the screws are short, and too many layers would make it hard to screw the chair pads back on the chairs.
First, I took the chair pads off. I labeled the direction on the bottom of the chair pad so that I could get it back on correctly. I then cut some fusible larger than the chair pad.
 |
| fusible fleece as backing for chair pad |
I then fused the fleece onto the back of the fabric I wanted to use. Make sure it lines up nicely. I then quilted thru the layers. I don't free motion quilt, but, this would have been a great 'practice' for free motion quilting (or ruler quilting). I was in a hurry, so, I just did straight line quilting on one chair fabric, and cross hatch quilting on the other chair fabric. You can't see the quilting from the front in the pictures, so, I took a picture from the back of one. I didn't really want my stitching to show, so, I used white thread in the white areas and black thread in the black areas.
 |
| straight line quilting from the back |
I used part of a panel for one chair, and cross hatch quilted it. I had a tiny bit of coordinating fabric to use for the top of the chair.
 |
| panel section, quilted |
 |
| coordinating fabric for the top of the chair |
Ok, that was the easy part. Now for the harder part, attaching the fabric to the chair pads. You will need a stapler and a hammer. I had to go buy the correct size staples. I used 1/4" staples. Anything longer might poke thru when the chair is sat on. Ouch! The hammer was used to finish driving the staples in. No matter how hard I pressed down, the staples didn't go all the way in, so, I hammered them the rest of the way in. Do this on a firm surface (I was bad, and used my cutting table).
Start by lining up the chair pad against the back of the quilted fabric.
 |
| chair pad lined up against back of quilted fabric |
On one chair, I used fabric with stripes, so, it helped to get the fabric lined up nicely. First, fold the fabric back over the bottom of the chair pad, and staple one side, in the middle. Then do the top, then both sides. Turn the chair pad over to make sure everything is lined up nicely before you start putting in more staples.
*Tip: Leave the screws in the screw holes so that you can find them easily, and so that you don't accidentally staple into the screw holes. Yes, you will be covering up the screw holes when you staple the fabric down.
When you are sure everything is lined up nicely, then finish stapling all 4 sides, leaving the corners till the end. You will need to 'pleat' the corners in a few places, to get them to look nice. Here are the backs of the chair pads.
 |
| pleated corners are stapled down |
 |
| some of my pleating on the corner |
The bottom chair pads are the easy part. That is why you want to do them first. You can learn on the bottom, easy part.
Now, to do the harder part, the top chair pad. With the curves, you need to go slower, and be more careful. It isn't hard, it just takes more care.
First, line up the quilted fabric against the front of the chair pad (back).
 |
| lined up, ready to start stapling |
Put one staple along the top edge, in the center. Then put one staple along the bottom edge, in the center. Turn over to make sure the fabric lines up like you want it to.
Next, put a staple along the bottom, one on each side of the staple in the middle. Now do the same with the top edge.
Now you need to put one staple along the curves on the side, slightly stretching the fabric as you go. Do the same with the other side. Turn over and check, to make sure it looks good.
*Tip: I put 2 staples in each place, one slightly lower than the other, on all the chair pads, to secure the fabric well.
As you go along the curves, you will need to 'pleat' the fabric, and staple each pleat.
 |
| pleated the edges along the curves |
 |
| up close of the pleats along the edges |
I stapled close to the edge of all the chair pads. This was only a problem in one area, the bottom of the back chair pad. You can see some of the staples from the back of the chair.
 |
| one staple peeking out after the chair back is attached |
Personally, this doesn't bother me, since no one is going to be looking at this part of the chair. They will only be looking at the chairs from the front of the chair.
One more thing before you attach the pads to the chairs. Remember those screws you left in the chair pads? Well, now is when you need to cut away the fabric around those screws. You can 'feel' for the screws, then carefully cut around the screws to expose them. Using sharp, pointed scissors makes this much easier. Keep trimming until the entire screw is showing.
 |
| showing fabric cut around the screw |
Remove the screws, and line up the holes with the holes in the chair. Make sure your chair pad is going the correct direction. Put the screws back, thru the chair screw holes. *You will need to press hard to the chair pad, to get the screw to engage. Do NOT tighten the screws until all the screws are attached (in case you need to adjust the chair pad). When all the screws are attached, tighten all the screws. Do this with both chair pads (bottom and back). Woohoo! You are DONE!
This is the chair I finished last night.
 |
| up close of the chair pads |
And here is the chair that I finished this morning.
 |
| up close of chair pads |
* You can also paint the chair to match the fabrics, if you'd like. I had thought of this, but, since it is winter (way too cold to be outside), and I was in a rush, I didn't do this. These fabrics look nice with this color paint. Depending on the fabrics I pick for the other 2 chairs, I might spray paint them before recovering them. Just take the chair pads off, get some spray paint you like, and spray the chairs. It would probably take 2-3 coats to cover everything.
These chairs will be in my vintage sewing machine booth, at my quilt guild's quilt show in March.
March 10 & 11, 2018
Richland Grade School
1919 Caton Farm Road
Crest Hill, IL 60403
Come visit me (and the chairs) at the quilt show! I'll have some
'wheelies' on these chairs, too.
